How to Configure Your Ajazz AK820 Pro – Complete Guide

Whether you’re a gamer chasing that extra millisecond or a writer who spends hours tapping away, the Ajazz AK820 Pro can be tuned to fit your rhythm. Below you’ll find the practical steps to get every key, backlight, and macro behaving exactly how you want.

Unpacking the Essentials

Before you dive into software, make sure the hardware is ready. The box typically includes:

• The AK820 Pro keyboard
• A detachable USB‑C cable
• Keycap puller
• Quick‑start guide

Give the keyboard a quick visual check: all 82 keys should sit snugly, the RGB strip should light up faintly when you plug it in, and the USB‑C port should be free of debris. If anything feels off, reach out to Ajazz support within the first 30 days.

Installing Ajazz Engine

The Ajazz Engine software is the control hub for lighting, macros, and key mapping. You can download it from the official Ajazz website – look for the “AK820 Pro” section under Downloads. Choose the version that matches your OS (Windows 10/11, macOS 10.15+).

Installation is straightforward:

• Run the installer and accept the license agreement.
• When prompted, allow the driver to install – this grants the software low‑level access to the keyboard.
• Restart your computer if the installer suggests it.

Once launched, the main window presents three tabs: Lighting, Key Mapping, and Macro. Let’s walk through each.

Lighting Settings

The AK820 Pro shines with per‑key RGB, a feature many users love for both aesthetics and functional cues. In the Lighting tab you can:

• Select a preset (e.g., Wave, Breathing, Static).
• Adjust brightness with a simple slider – 0 % to 100 %.
• Pick custom colors for individual keys by clicking on them.
• Save your own profiles to the keyboard’s onboard memory (up to five).

A tip for gamers: set a contrasting color on your WASD cluster. It reduces the chance of mis‑presses when your eyes are glued to the screen.

Key Mapping Basics

Out of the box the AK820 Pro follows a standard US layout, but you can remap any key. Here’s a quick workflow:

1. Choose the Key Mapping tab.
2. Click the key you wish to change – it will highlight in blue.
3. From the drop‑down, select a new function (e.g., change Caps Lock to Esc).
4. Hit Apply and test the change in a text editor.

For people who type a lot, swapping the Enter and Backspace keys is a popular tweak – it mirrors the layout found on many ergonomic keyboards.

Creating Macros

Macros are where the AK820 Pro truly shines. You can chain up to 25 keystrokes, assign a delay, and bind the sequence to any spare key (the function row works well).

• Open the Macro tab and click New Macro.
• Record your sequence – each press appears as a line item.
• Adjust the delay between actions if needed (e.g., 100 ms for smoother game combos).
• Click Save and drag the macro to your desired key slot.

Remember: while macros boost efficiency, many competitive games flag them as cheating. Use them primarily for productivity tasks or non‑competitive play.

Fine‑Tuning the Switches

The AK820 Pro ships with hot‑swappable Gateron switches. If you prefer a tactile feel over a linear one, swapping is painless:

1. Power off the keyboard and disconnect the USB cable.
2. Use the included puller to lift the switch you want to replace.
3. Align the new switch’s pins with the socket and press gently until it clicks.
4. Reconnect and test the key response.

Because the sockets are built for repeated swaps, you can experiment with different switch types without soldering. Just keep a small brush handy to clear any dust that might settle in the socket.

Saving and Switching Profiles

The AK820 Pro can store up to five profiles directly on the board, meaning you can carry your setup between computers without reinstalling the software. To save a profile:

• Configure lighting, key mapping, and macros as desired.
• Click the Save to Device icon (usually a floppy‑disk symbol).
• Choose a profile slot (1‑5) and give it a name.

Switching profiles on the fly is as simple as holding Fn + 1‑5. The keyboard flashes the profile number, confirming the change.

Troubleshooting Common Issues

A few hiccups are normal, especially when you first connect the keyboard. Here are quick fixes you can try before calling support:

• No lighting: Verify the Brightness slider isn’t at zero and that the USB‑C cable is firmly seated.
• Key doesn’t register: Re‑plug the keyboard, then check the key mapping in Ajazz Engine. If the problem persists, try swapping the switch.
• Macro won’t execute: Ensure the macro isn’t assigned to a key that the OS already reserves (e.g., Ctrl + C).
• Software won’t detect the keyboard: Update your USB drivers via Device Manager (Windows) or check System Information (macOS).

If none of the above solve the problem, capture a screenshot of the Ajazz Engine window and attach it to a support ticket – the team usually replies within 24 hours.

Maintaining Your Keyboard

Long‑term care keeps the AK820 Pro responsive and looking fresh:

• Wipe the surface with a microfiber cloth regularly.
• For deeper cleaning, detach the keycaps and use compressed air to blow out debris.
• A gentle dip in isopropyl alcohol (70 % or higher) works for stubborn grime, but avoid soaking the PCB.
• Store the keyboard in a dry environment; high humidity can affect the hot‑swap sockets over time.

Following these steps, you’ll likely extend the keyboard’s life beyond the typical three‑year window most gamers expect.

Final Thoughts

Configuring the Ajazz AK820 Pro isn’t just about making it look cool – it’s about shaping a tool that matches your workflow and play style. With the software’s intuitive interface, hot‑swappable switches, and onboard profile memory, the learning curve is modest. Spend a little time tweaking lighting, remapping a few keys, and setting up your go‑to macros, and you’ll notice the difference immediately. Happy typing, and may your combos be smooth!